We often have free and almost endless resources at our fingertips that save us money. For example, Recovering and collecting rainwater means we have at our disposal a valuable asset that avoids wasting drinking water for multiple daily activities.like watering, cleaning and even cooking.
Collected and filtered rainwater can be used for house cleaning and laundry. Washing efficiency is greater and it saves both drinking water and the use and purchase of detergent and anti-limescale for the washing machine.
Also, since rainwater does not contain lime, it is sufficient to use rainwater to flush the toilet without fear of scale.
Same way,Pta to irrigate the garden or garden saves drinking water and cuts our bill.
Thanks to special collection systems, rainwater can be used for personal hygiene, filling the bathtub and brushing teeth as well as taking a shower.
Adequate use of rainwater cleaning the floor and washing the dishes by hand and also for the car.
how to do it easily
But how is rainwater collected? To achieve our goal, it is enough to devote an afternoon to bridging. The methods are many and varied, but one of the simplest systems for collecting rainwater for irrigation is placing one or more sufficiently large tanks outside. Those who live in apartments and have a balcony or terrace can collect rainwater by placing a few buckets in the most suitable places.
This will allow you to water the plants, the vegetable garden and the garden without having to resort to running water in the summer.
It is important to pay special attention to the choice of the point of the house where the tank will be located and its height from the ground.
The drums we will use should be well supported so that they do not fall over due to the weight they will reach when full. Rainwater will enter through a gutter at the top or other channels that facilitate the transmission of water to the drum. Ideally, we keep the barrels closed, in the cap of which we will drill a hole when connecting the pipe.
Since it will be filled at the end, it is convenient for this drum to be connected to one or the other via a lateral pipe, such that when the water reaches a certain height and before it overflows, it passes through the mentioned pipe to the next drum.
However, since the latter is also possible to overflow due to the continuing rain, It is convenient to open a spillway at the top so you can expel excess water.
it might be interesting place a faucet anywhere in the system to have water in the same placemaybe filling a bucket to water or wash the garden.
By following the instructions in the video below, you can understand how simple it can be to install a rainwater harvesting system for outdoor or gardens.
The water we obtain must be taken into account. It may even be suitable for human consumption but for that you have to make sure it is really clean.. Of course, if rainwater falls directly on a roof, it will not be suitable for consumption without treatment because the particles that fall on the roof (especially if we are in a city) contains impurities and even potentially dangerous contaminants. However, if rainwater falls directly into the drum from a perfectly clean surface and we are not in a polluted city, it can be used for consumption.
In any case, there are systems that simply and reliably filter the liquid, as seen in this link, to complement the rainwater collection we have just described and to ensure its complete safety.
……
Contact address of the environment department: crizclimatica@prensaiberica.es
Source: Informacion
James Sean is a writer for “Social Bites”. He covers a wide range of topics, bringing the latest news and developments to his readers. With a keen sense of what’s important and a passion for writing, James delivers unique and insightful articles that keep his readers informed and engaged.