Cleaning blinds can feel like a tough task because dust builds up and it’s hard to reach every slat. A simple, reusable tool often overlooked is an old sock. Yes, your old socks can become a surprisingly effective cleaning ally for this job. Cotton socks work best because they trap dust more efficiently. Below is a practical guide on how to use them to refresh your blinds.
Relating to
-
Discover the secret to keeping your towels always soft and fresh
-
The foolproof trick to disinfect the toilet in less than a minute
-
How to clean washing machine rubber and remove mold stains
How to clean very dirty blinds with an old (but clean) sock?
-
Preparation: Find a clean old sock. A cotton sock is preferred because it attracts and holds dust better.
-
Prepare the cleaning solution: Create a simple mix with water and a small amount of mild soap. Fill a bowl or bucket with warm water and add a few drops of soap. Stir until a light foam forms.
-
Prepare the sock: Slip your hand into the sock as if it were a glove. Dip the sock into the soapy water and ensure it is thoroughly soaked.
-
Clean the blinds: Glide the sock along each slat from the top downward. The sock gathers dust and dirt as it moves. Be sure to clean both sides of every slat.
-
Rinse and repeat: When the sock becomes dirty, rinse it in the soapy water, squeeze out excess moisture, and continue until all slats are clean.
-
Drying: After cleaning, use a dry sock or a soft cloth to dry the slats. This helps prevent water spots and keeps the finish looking fresh.
-
When finished, discard the used socks in the trash and move on to the next cleaning task.
How to clean blinds from the outside: the exact trick
Mati Şirvent
You may be interested in:
Seven things you can put in the washing machine (and you didn’t know)
If your iron burns, do not throw it away: this way you can save it
Product that costs less than three euros and removes tough stains and bad odors from clothes
Does the old sock trick apply to all blinds?
This method works well for vinyl or faux wood shutters. If the blinds are natural wood, use a lighter touch with moisture. Excess moisture can damage wood, so opt for a barely damp sock and dry the slats immediately after cleaning.