Cleaning shutters can be tricky because dust loves to cling to every slat and reaching each one can be a challenge. A used sock, especially a cotton one, becomes a surprisingly effective cleaning tool for this job. Cotton socks trap dust well and are gentle on slats, making them a practical, inexpensive option. Here is a simple, practical method for using an old sock to clean blinds efficiently.
Join BİLGİ WhatsApp channel
INFORMATION
How to clean very dirty blinds with an old (but clean) sock?
-
Preparation: Find one clean old sock. It is best if the material attracts dust, like cotton.
-
Prepare the cleaning mixture: Create a simple solution with water and a small amount of mild soap. Fill a bowl or bucket with warm water and add a few drops of soap. Mix until a light foam forms.
-
Prepare the sock: Slip your hand inside the sock as if it were a glove. Then dip the sock into the soapy water until it is thoroughly saturated.
-
Clean the blinds: Glide the sock along each slat of the blind, starting at the top and moving downward. The sock captures dust and dirt as you go. Be sure to clean both sides of every slat.
-
Rinse and repeat: When the sock looks dirty, rinse it in the soap and water solution and squeeze out the excess liquid. Repeat this process until all slats are clean.
-
Drying: After finishing, use another dry sock or a soft cloth to dry the slats. This helps prevent water spots and leaves a neat finish.
-
When the job is done, they can be discarded as usual with household waste.
From yellow to pure white: how to clean the bottom of the toilet with quick and homemade tricks
Mati Şirvent
You may be interested in:
Decor
Say goodbye to yellow stains on the armpits of white clothes with this secret from experts
Decor
Good news for your wooden doors: You’ll now leave them shiny
Decor
Say goodbye to yellow stains on your mattress: how to get rid of them in two steps
Does the old sock trick apply to all blinds?
This method can be especially useful for vinyl or faux wood shutters. If curtains or blinds use natural wood, be cautious with water; excessive moisture can damage the wood. In such cases, use a slightly damp sock and dry the slats immediately after cleaning to protect the finish.