Clean Blinds It can be a difficult job due to the amount of dust This can already add up to how complicated it can be to get to all the slats. However, an old sock can be a very useful tool for this task. So from now on, don’t throw away your old socks because they will be your best ones. cleaning ally The best ones are cotton ones because they absorb dust much better. Here we will explain you how to do this.
How to clean very dirty blinds with an old (but clean) sock?
-
Preparation: Find one clean old socks. It is preferred to be made of a material that attracts dust. cotton.
-
Prepare the cleaning mixture: You can make a simple solution with. water and some mild soap. Fill a bowl or bucket with warm water and add a few drops of soap. Mix well until foam forms.
-
Prepare the sock: Place your hand inside the sock as if it were a sock. glove. Then soak the sock in the soapy water solution. Make sure you have socks thoroughly soaked.
-
Clean the blinds: Slide the sock along each slat of the blind, starting from the top and going down. The sock should collect dust and dirt. Be sure to clean both sides of the slats.
- Rinse and repeat: When socks become dirty, rinse them in a soap and water solution and squeeze to remove excess water. Repeat this process until all slats are clean.
-
Drying: You can use it after you finish cleaning the blinds. another dry sock (or a soft cloth) dry the slats. This will help prevent water spots from forming.
-
Once the cleaning is done, you can throw that pair of socks in the trash.
Does the old sock trick apply to all blinds?
This method may be particularly useful for: Clean vinyl or faux wood shutters. If your curtains are made of natural wood, you should be careful about the amount of water you use, as the wood can be damaged by excessive moisture. In this case, it is best to use only a slightly damp sock and dry the slats immediately after cleaning.