In RoboCop: Rogue City, players step into the role of the Tin Woodman, a fearless investigator who also serves as a mobile weapon. The game presents a pair of bomb-defusal challenges that test quick thinking and precision. Early on, a belt-mounted device on the bank manager requires careful action, and shortly after, a second timer near Detroit demands rapid, accurate disconnection of nine wires. This guide explains how to complete both defusal tasks safely and efficiently.
RoboCop: Rogue City Guides
How do you defuse a bomb in a jar?
Midway through the narrative, RoboCop arrives at the OCP Bank. The player faces OCP guards and makes their way to the vault, where a bank manager and Max Becker hold explosives on his belt. The situation is outlined in brief over the radio, and the basics of sapper work are explained. Defusing this type of device requires removing wires in a specific order that reduces the risk as the timer counts down.
- Disconnect the green wire carrying 24V.
- Then remove the blue wire rated at 12V.
- There remains a 12V wire, which is twisted, with the connection point at the bottom.
- Finally, if a new situation arises, disconnect the remaining wire at 6V to complete the demining sequence.
To help visualize the sequence, a screenshot is provided for reference.
How do you defuse a bomb in a sewer?
The next challenge appears later, during a city-wide cleanup as bandits invade. Vultures have taken shelter within the sewers, placing red barrels and concealed charges. Enemies are sparse in this area, so it is wise to avoid heavy fire and rely on methodical actions. A device with nine wires and a one-minute timer is secured to a pole in the center of the area. The wire order must be followed as described below.
- Proceed from left to right, moving three sections at a time. Begin by disconnecting the second wire, which is powered by 30V.
- Next, the 24V wire to the left is removed.
- The third wire in this block, at 21V, is then disconnected.
- In the middle block, 19V stands out as slightly darker and should be switched off first.
- The wiring diagram mirrors the first block, with the 16V wire on the left and 12V remaining to be cut.
- The 9V wire is visible in the final section. It is shut off next.
- Two wires remain. In the middle position is a 6V wire, followed by the final wire at 3V.
For clarity, a reminder image is included below to help keep track of the wires during the defusal process.
Overall, the experience is compact but engaging, offering fast-paced decisions that demand steady nerves. With these steps, players can successfully defuse all bombs encountered in RoboCop: Rogue City.