A load emerging from the washing machine can reveal dark spots stuck to the drum. A closer look shows stubborn mold. Moisture is usually to blame. The appliance often traps some water, creating a perfect environment for mold to grow and even release a musty smell inside the drum and seals.
Relating to
-
Steps to clean your washing machine (inside)
-
Three tricks to make your laundry come out cleaner than the washing machine
The guide explains how to remove rubber buildup from the washing machine. It starts with a simple principle: prevent the problem before it starts. After every wash, take out the laundry promptly and leave the door ajar to air out and dry the interior. This helps prevent water from pooling and discourages mold and mildew from taking hold.
When is the best time to run the washing machine today?
The same idea applies to clothes. Do not leave dirty laundry inside for days. Waiting with wet items inside can encourage mildew growth and worsen odors. After each cycle, wipe the rubber gasket with a cloth to remove any remaining moisture or residue and reduce the chance of fungus taking root.
Seven things you can put in the washing machine (and you didn’t know)
How to clean the washing machine rubber with natural products
If someone prefers not to use chemical cleaners, a homemade solution can help remove odors and mold. Mix three liters of water, 60 ml of lemon juice, and 250 ml of hydrogen peroxide. Apply this mixture to the rubber gasket, let it sit briefly to loosen mold, then wipe clean with a cloth and dry thoroughly. For embedded mold, a gentle sponge can be used carefully to avoid damaging the rubber.
How to clean the rubber of the washing machine with bleach
You may be interested in:
Bleach method note: Mix four parts water with one part bleach and transfer to a spray bottle. Apply to the rubber gasket, let it stand a few minutes, wear gloves, wipe with a damp cloth, rinse with cold water, and dry thoroughly. Keep the door open afterward to ensure complete drying and prevent residual moisture from lingering in the seal.
Using these methods helps keep the rubber looking like new, drying thoroughly and reducing odors, which supports smoother machine operation and longer life.