Are we sure we know? open them well radiators to save money? Specifically, do you need to keep them on all the time or use them intermittently according to needs? Let’s look at some information on this topic.
They are coming slowly coldat least at night, so it’s time to start thinking heating. There is no shortage in every home and everyone chooses the one that best suits their needs.
Many people use combi boilers and this situation Use of radiators in all rooms of the house. So how to turn on radiators to save money? Billing costs have been a cause for concern in recent months. Therefore, it is normal for people to look for strategies or tips to cope with the cold months without spending a lot of money and stay warm at the same time.
Actually it would be enough to know the correct way to open radiators, and we can provide very useful information on this subject.
Function of radiators
The boiler is connected to the radiators of the house. The device produces hot water and sends it directly to the radiators. Filled with hot water, they heat both themselves and the environment.
The boiler can be electric or wood-burning. The process is also reversible, meaning the water returns to the boiler that heats it, and so on. But we need to take this into consideration every year. maintenance of the entire system.
Special care needs to be takenr Clean radiators and pipes, and check the valves of each radiator.
How to turn on radiators to save money: no doubt
A person can think logically Only turn on radiators at night or to heat the house a little during the coldest hours and then turn it off. It means a few hours less consumption. Actually it is not.
There is something wrong with turning on air conditioners intermittently: a serious drop in temperature when the air conditioners are off. As a result, they have to make a great effort when turned on to return. satisfactory temperature.
This effort results in large amounts of energy consumption and therefore a very high bill cost. There is also a risk of damage to the boiler due to temperature fluctuations.
In winter, at low temperatures, it is best to leave radiators on all the time. If necessary, especially on cold days, you can increase the temperature by 1 or 2 degrees via the thermostat, without exaggerating it.
In this way, the boiler will work with minimum effort and ensure that the house is always at a moderate temperature. Also the walls will always be warm and There will be no risk of spikes damaging your equipment or your wallet.
How to bleed the radiator
What exactly does the liquidation process involve? radiators? Essentially, it is the elimination of air bubbles trapped in the system that pose a risk to the optimal functioning of safety devices. heating. Although many systems heating Modern ones include automatic draining, there are others that require manual draining. These air bubbles tend to form in the spring and summer months when heating is not being used. Therefore, it is recommended that you learn how to perform this procedure before the arrival of winter to avoid complications.
The first step involves checking for gurgling sounds in the air ducts. radiator. If you can’t hear them, tap the top of the screen. radiator to determine if it is colder than below. These signs are an indication that the radiator needs to be bled and it is recommended to check the radiator a few days before opening it. Central heating To avoid unpleasant surprises.
After confirming this radiator If it needs cleaning, follow these steps. Be sure heating is turned off before starting. Air bubbles tend to accumulate at the top. radiator when it’s cold. It is recommended to start with the radiator closest to the boiler as it follows the natural flow of water.
Then place a container under the valve. radiatorbecause this is where the water will fall during the cleaning process. Use a screwdriver to turn the valve switch. When turning on the device radiator, you will notice that water, which may have an unpleasant odor due to the time it has been trapped, comes out with the air. When the water flows evenly and continuously, this indicates that all air has been removed. Repeat this process on all radiators your house.