This iron It is one of the small household appliances that makes our daily life easier and makes our clothes look stretchy and clean to wear both in our daily work and on our most special days.
However, with use the plates collect waste can be irritating and irritating, and especially spoil our clothes When it is concerned lime, rust, or dirt. Ironing starches even leave sticky residues that need to be removed.
To do this, we provide you with the best tips for making your iron look clean, shiny and shiny and for best results while respecting your clothes.
1. Cleaning with baking soda
Mix two tablespoons of baking soda with water, mix until you get a slightly thick paste, apply it to the grill with your fingers or a spatula, wait for it to take effect and then remove it with a damp cloth. Wipe with another dry cloth and stick for holes. Then empty the chamber, refill it with distilled water or vinegar, set the iron to maximum temperature and generate steam that will go through the holes and remove any remaining dirt. Iron an old rag or useless piece of clothing to collect any remaining residue, empty the bin and wait for the iron to cool.
2. Salt cleaning
Pour a few tablespoons of fine table salt onto a dry cloth, heat the iron (carefully to avoid burning), and rub until smooth. disappearance of spots. Allow to cool and wipe with a damp cloth to remove residue.
3. Cleaning with vinegar
Wet a cloth with warm white vinegar and rub the soleplate of the iron with it. For heavily settled stains, do the same with vinegar and salt. At the end of the process, clean it with a dry cloth.
4. Cleaning with detergent
Ideal for non-stick plates. Heat the water and small amount of detergent for laundry (a few drops might be worth it). Use a cloth to dip it in the mixture and rub the iron with it.
5. Cleaning with dish soap
It is used for stains that occur in areas that act as plate openings. Mix the liquid with water and use a cotton swab to wet it and go over the areas you want to clean.
6. Cleaning with toothpaste
Pour the paste directly onto the soleplate of the iron (a small amount) and then pass a cloth to rub and reach. all stained areas. Turn on the iron to let out steam and that steam will be the steam that cleans the holes.
7. Cleaning with newspaper
The right way for sticky stains that some ironing starches can leave behind. Turn on the iron, plug it in maximum temperature without water or steam, Unfold the newspaper onto the table and gently run the iron until all residue is removed.