Now that the temperature has shrunk, you might be looking for: how do you cool your home. A ceiling fan Even if you have an air conditioner, it can be an excellent option as it provides fresh air and has a much lower consumption than other devices.

Related

  • The three cheapest ceiling fans from Leroy Merlin

  • Bladeless ceiling fan: 4 perfect models for your living room

So if you’ve decided to install one in your home, we’ll explain it to you. how to install step by step. Remember that the fan is connected to the house’s electrical outlets and this setup will depend on the electrical wiring. roof type where you want to hang it. with a roof. concrete slab, vaulted slab or suspended ceiling. In any case, you should use the most suitable studs for each surface. Also make sure the plate is in good condition to avoid fear.

Since the device may have more or less wings, power or light, it is also important to choose the device well considering the dimensions of the room you will install and the use you will give. Think carefully about what you need.

How to install a ceiling fan

You may be interested in:

Decor

Leroy Merlin’s new ceiling fan that impresses with its price and design

Decor

The five cheapest Carrefour floor fans

Decor

The four cheapest ceiling fans from Carrefour


To install the fan, you must disconnect the light’s power supply from the general panel. You should also take into account the minimum distances for mounting the fan. Therefore, the ground clearance should be 2.4 meters and about 50 centimeters from the side wall.

  1. first thing you should do Install the fan blades. To do this, remove the fastening screws of the case with a screwdriver.

  2. Insert the blades and screw them back. This point is very important for proper operation.

  3. Location base of luminaire with bulb socket. The base and wiring have an attachment that you need to connect. Place the armature base on the fan body and screw it in.

  4. get middle Place it on the fan and ceiling. Mark with a pencil where you will drill holes for the dowels.

  5. Drill at the marked points and insert the plugs into the bracket and screw them into the ceiling. You already have the support fixed to the ceiling.

  6. You should do it now light links. Make sure that the colors of both parts match at the terminal: neutral (blue), black, gray or brown (phase) and yellow or green (earth connection).

  7. Hang the fan from the bracket remove it from the ceiling and make the electrical connections.

  8. place crop and tighten the screws. You are already ready to use it.