We often have almost endless free resources at our fingertips that help us save money. For example, Recovering and collecting rainwater means we have at our disposal a valuable asset that avoids wasting drinking water for many daily activities.such as watering, cleaning and even cooking.
Collected and filtered rainwater can be used for house cleaning and laundry. The washing efficiency is higher and it saves both drinking water and the purchase and use of detergents and anti-limescale agents for the washing machine.
In addition, since it does not contain rainwater, the use of rainwater is convenient for flushing the toilet without fear of scale.
Same way,pta water the garden or orchard, save drinking water and cut the amount of our receipt.
Rainwater can also be used for personal hygiene, bathtub filling, tooth brushing and showering thanks to special collection systems.
The use of rainwater is suitable for: cleaning the floor and washing the dishes by hand and also for the car.
how to do it the easy way
But how is rainwater collected? All it takes is an afternoon of bricolage to reach our goal. The methods are many and varied, but one of the simplest systems for collecting rainwater for irrigation, placing one or more large enough tanks outside. Those who live in apartments and have a balcony or terrace can collect rainwater by placing a few buckets in the most suitable places.
This allows you to water your plants, orchard and garden without having to resort to running water in the summer.
It is important to pay special attention to the choice of the point of the house where the tank will be located, and its height from the ground.
The drums we will use should be well supported so that they do not tip over due to the weight they will reach when full. Rainwater will enter from its upper part through a gutter or other channel that facilitates the transmission of water to the drum. Ideally, we keep the drums closed, in the cap of which we will drill a hole when connecting the pipe.
Since it will end with the filling, it is convenient to connect this drum to the other or to the others by means of a lateral pipe, thus, when it reaches a certain height and before it overflows outside, the water passes through said pipe to the next drum.
However, as it is possible for the second drum to overflow due to continuous rain, It is convenient to open a spillway at the top so that it can expel excess water.
it might be interesting place a faucet somewhere in the system so that there is water in the same placemaybe to fill a bucket to water or wash the garden.
By following the instructions in the video below, you can understand how simple it can be to install a rainwater harvesting system for outdoors or gardens.
The water we take it may even become fit for human consumption, but for that you have to make sure it is really clean.. Of course, if rainwater falls directly on the roof, it will not be suitable for consumption without treatment due to the particles falling on the roof (especially if we are in the city). contains impurities or even pollutants that can be dangerous. But if rainwater falls directly into the drum from a perfectly clean surface and we are not in a polluted city, it can be used for consumption.
In any case, there are systems that simply and reliably filter the liquid, as seen in this link, to complement the rainwater collection we have just described and to ensure its complete safety.
……
Environment department contact address:[email protected]
Source: Informacion
Anika Rood is an author at “Social Bites”. She is an automobile enthusiast who writes about the latest developments and news in the automobile industry. With a deep understanding of the latest technologies and a passion for writing, Anika provides insightful and engaging articles that keep her readers informed and up-to-date on the latest happenings in the world of automobiles.