Clean the soleplate of the iron It’s a job that can vary in complexity depending on how dirty it is, but it’s important to keep your delicate laundry spotless at all times to avoid potential problems. Here are some effective ways to store always shiny iron.
How to clean the soleplate of the iron
- Wet suit: Unplug the iron and wait for it to cool. Clean the soleplate with a damp cloth.
- white vinegar: Dampen a cloth with white vinegar and scrub the soleplate of the iron (make sure it’s cold and unplugged). Vinegar dissolves many types of stains and is good for removing traces of starch. Do not use irons with aluminum soles as they may cause damage.
- Salt: Preheat the iron to a low setting without steam. Sprinkle a layer of salt on a newspaper or paper towel. Run the hot iron over the salt. The salt particles should help loosen any debris at the base.
- Tooth paste: Apply a small amount of white toothpaste (not gel) to the cold, unplugged base plate. Rub with a clean, damp cloth. Then wipe off the residue with another damp cloth.
- Sodium bicarbonate: Make a paste with baking soda and water. Apply this mixture to the cold, unplugged base with a soft cloth, then wipe with a damp cloth to remove any residue.
-
Commercial cleaner: There are cleaning products specifically designed for cleaning irons. If you choose this option, be sure to follow the manufacturer’s instructions.
- Settle down: Fill the iron’s water tank, turn the setting to maximum and turn on the steam over an empty cloth or sink to make sure any cleaning residue is gone.
-
Test: Finally, iron a test fabric to make sure all residue is removed.
Always remember to read your iron’s user manual to make sure you don’t run into any problems. cleaning method be safe for your specific model.