We have free and almost endless resources that often save us money. For example, Recycling and collecting rainwater means retaining a valuable asset; This eliminates having to waste drinking water in many daily activities.such as watering, cleaning and even cooking.
Collected and filtered rainwater can be used for house cleaning and laundry. Its washing efficiency is higher and it allows you to save both drinking water and the use and purchase of detergents and anti-limescale for the washing machine.
In addition, since it does not contain rainwater, it is suitable to use rainwater to flush the toilet without fear of limescale.
Same way,It is suitable for watering the garden or orchard, saving drinking water and reducing our bill amount.
Thanks to special collection systems, rainwater can be used for personal hygiene, bath filling and tooth brushing purposes as well as showering.
Rainwater is suitable for use cleaning the car as well as the floor and washing the dishes by hand.
How to do it easily
So how is rainwater collected? All you have to do is devote an afternoon to DIY to achieve our goal. The methods are many and varied, but one of the simplest systems for harvesting rainwater for irrigation is placing one or more sufficiently large tanks outside. Those who live in apartments and have a balcony or terrace can collect rainwater by placing a few buckets in the most suitable places.
In this way, you can water your plants, orchard and garden without the need for running water in the summer months.
It is important to pay particular attention to the selection of the spot where the tank will be placed in the house and its height from the ground.
The barrels we will use must be well supported to prevent them from tipping over due to the weight they will reach when filled. Rainwater will enter from the top through a gutter or other channel that facilitates the delivery of water to the drum. The ideal thing is to keep the barrels closed, in which we will drill a hole in the lid, while connecting the pipe.
It is recommended to connect this barrel to another or others via a side pipe as it will result in filling, Thus, when the water reaches a certain height and before flowing out, it passes to the next drum through the said tube.
Since there is a possibility that the second drum will overflow due to the rain that continues despite everything, It is recommended to open a spillway at the top so it can expel excess water.
It might be interesting Place a tap anywhere in the system so that water is available in the same placemaybe watering the garden or filling a bucket for washing.
By following the instructions in the video below, you can understand how simple installing a rainwater harvesting system for an outdoor or garden can be.
The water we obtain must be taken into account. It might even be fit for human consumption, but to do that you have to make sure it’s really clean.. Of course, if rainwater falls directly on the roof, it will not be very suitable for consumption without purification due to the particles falling on the roof (especially if we are in the city). They contain impurities and even contaminants that can be dangerous.. Rainwater can only be used for consumption if it falls directly into the container from a completely clean surface and we are not in a polluted city.
In any case, to complement and ensure the safety of the rainwater harvesting we have just described, there are systems such as the one seen in this link that simply and reliably filter the liquid.
……
Contact address of the environmental department:[email protected]