iron It is an indispensable device in the daily life of many homes and plays a very important role in the care of clothes. Although it is used frequently, less importance is often given to it in terms of maintenance. A burnt iron or an iron with limescale and fabric residue on it can damage, stain or damage clothes. However, cleaning and properly maintaining the iron is a simple task and can be done with common household products and you do not need to spend a fortune on them.
An effective method for clean the surface iron It has to do with the use sodium bicarbonateIt is a basic and accessible cleaning product that we find in almost every home today.
If you want to use baking soda to clean your iron, you must mix it. two tablespoons baking soda with water (which is even more useful if distilled) until a paste is obtained. This paste should be applied to the soleplate of the iron, which should be turned off and cooled. Use a spatula to spread the mixture evenly, preferably made of a material that will not scratch the iron. Let it sit for a few minutes and then remove the paste with a clean, slightly damp cloth. Finally, wipe the surface with a dry cloth to remove any remaining residue.
A useful tool for cleaning the iron’s vents is Q-tips, which can be moistened with distilled water or a little white vinegar. This technique is especially effective in cleaning dirt accumulated in hard-to-reach areas.
The base of the iron burned
If the soleplate of the iron is burnt, an alternative method is to use it. coarse salt and newspaper. Spread a thick layer of salt on a sheet of newspaper and slide the iron over the salt a few times while it’s still hot. This process helps remove burnt stains without damaging the surface of the iron. It is important not to apply too much pressure during this process to avoid scratches and to ensure that the soleplate is non-stick. After this process, wipe off the remaining salt with a damp cloth.
Cleaning the inside of the iron is equally important. To do this, fill the iron chamber with distilled water alone or mixed with white vinegar for a deeper clean. Set the iron to the highest temperature and activate the steam option. Move over an old cloth or towel by steaming it to remove limescale and accumulated dirt. Once this process is completed, empty the tank and when the iron has cooled down, wipe it with a clean cloth and make sure there is no dirt left.
In short, keeping your iron clean and well-maintained will not only prolong its life, but also keep your clothes in good condition. With a few simple steps and common products you can always keep your iron in top condition and ready for use.