take care of us home appliances This should be a motto in our house. Keeping them in good condition ensures that we extend their lifespan and therefore save a large amount of money. Not only because we won’t have to replace them, but also because they won’t cost us more money on our electric bill.
One of these indispensable devices in our home is iron. It is a device that we use several times a week and we always need it to be in perfect condition and ready for use at any time. So make it happen proper care Our iron must be essential.
This is how you should clean your iron from the inside: Tips for effective cleaning
Normally, when our iron breaks down, the first thing we notice is its soleplate. It is quite common for the sole to darken depending on use or due to the materials we iron and which remain stuck. This can ruin both your iron and your clothes because you could get them broken or stained.
Here we told you to clean it burnt iron You can use baking powder. You mix two tablespoons of this product with water (better if it is distilled) and spread the resulting paste on the soleplate of the closed and cold iron. Let the mixture sit for a few minutes and remove with a clean cloth, making sure no residue is left. This is an effective solution to remove the black parts that remain stuck to the base.
Another remedy you can use is newspaper and coarse salt. Take a newspaper and spread the salt on it.. Run the warm iron over it several times without applying too much pressure to avoid damaging it. Remove any trapped debris and leave it clean and ready to use.
To clean the holes, you can use Q-tips and dip them in distilled water or cleaning vinegar.
How to clean the iron inside?
Another of the most common problems with your iron is that there is too much limescale build-up and you see white particles when you iron or when steam comes out of the holes. So the problem is in the tank and the channels we need to clean.
To do this, make a mixture of equal parts water, cleaning vinegar and water and fill the water tank with it. Turn the iron on and when it is hot, press the steam button to release it from all channels. You will see how all the accumulated limescale begins to come out.