One of the elements in the bathroom most exposed to dirt and other problems is undoubtedly the shower cabin. This is where you’ll find it lime, dust and mold stains It is caused by constant contact with water.
But did you know that there is a remedy that can solve all these problems? Well yes. Let’s find out!
Remove the mold
Let’s start by removing the mold that takes the form of blackheads, which is usually found in the corners of the shower stall, on the bars, or on the silicone.
The solution we suggest is to use . vinegarAn ingredient known for its cleansing, whitening and degreasing properties. Moreover, it is also a blessing against mold. Pour the vinegar onto a microfiber cloth (or several) and place it over the rails and silicone.
Let it sit for at least an hour before scrubbing thoroughly with a toothbrush to remove all mold. And that’s it. It’s a brush you can find in any supermarket. Lidl.
Remove limescale
Besides mold, another common problem in the shower stall is scaling caused by constant contact with water; This results in the release of lime deposits, which often accumulate in the form of whitish stains on steel surfaces such as faucets and faucets.
Fortunately, even in this case, vinegar can come to our aid as it has brightening properties. It can actually make your kitchen stainless steel shine like a mirror! Pour the vinegar into a spray bottle and spray on the faucet, flexible hose and shower head, then let it sit for about ten minutes and scrub vigorously.
For better descale the shower headYou can also try the bag trick, which involves filling a plastic bag with vinegar and dipping the shower head into it to open the holes. Then tie the bag with a rubber band and let the artichoke soak for about 30 minutes before rinsing: goodbye limescale!
To polish glass
However, lime also accumulates glassIt not only creates white water spots, but also changes its shine and makes it opaque.
You will be happy to know that vinegar can also help you in this situation, removing water stains and making your crystals shine brighter than ever before. Pour equal parts vinegar and water into a spray bottle, shake carefully to mix the ingredients, and spray the mixture over the entire surface of the glass. Then gently wipe with a microfiber cloth in circular motions; Water stains will be a thing of the past.
If you want to make the job even faster, get a squeegee.
Tiles and grout
Mold, lime and residues resulting from products used in the shower also settle in bathrooms. shower tiles and leaves them black and dirty along the joints. But fear not, vinegar can also help you deep clean tiles and whiten darkened grout.
Pour the vinegar into a spray bottle and spray these surfaces, then scrub with a toothbrush and let it sit for 1 hour, then rinse thoroughly.