Iron is one of them small appliances They are products that make our daily lives easier and allow us to keep our clothing items stretched and clean so that we can wear them both in our daily work lives and on our most special occasions.
But with use plates accumulate debris It can be irritating and annoying and can ruin our clothes, especially when it comes to it. limescale, rust or dirt. Even ironing starch leaves sticky residue that needs to be removed.
That’s why we bring you the best homemade tricks for check your iron cleanbright and shiny and get the best results by respecting your clothes.
1. Cleaning with baking soda
Mix two tablespoons of baking soda with one tablespoon of water, stir until a slightly thick paste forms, rub it into the iron with your fingers or a spatula, wait for it to take effect, and then wipe it off with a damp cloth. Wipe it with another dry cloth and Glue it into the holes. Then empty the tank, refill it with distilled water or water mixed with vinegar, set the iron to maximum temperature and generate steam that will pass through the holes and remove any remaining dirt. Iron an old cloth or useless garment to collect debris, empty the bin and let the iron cool.
2. Cleaning with salt
Pour a few tablespoons of fine table salt onto a dry cloth, heat the iron (carefully to avoid burns) and rub until smooth. disappearance of spots. Let it cool and wipe it with a damp cloth to remove any residue.
3. Cleaning with vinegar
Wet a cloth with warm white vinegar and rub the soleplate of the iron with it. For very stubborn stains, do the same process with vinegar and salt. Clean it with a dry cloth when finishing.
4. Cleaning with detergent
Ideal for non-stick grills. Heat the water and pour it small amount of detergent for washing clothes (a few drops might be worth it). Use a cloth to dip it in the mixture and rub the iron with it.
5. Cleaning with dishwashing liquid
It is used on stains in the working areas. plate openings Mix the liquid with water, wet it with a cotton swab and apply it to the areas you want to clean.
6. Cleaning with toothpaste
Pour the paste (a small amount) directly onto the soleplate of the iron and then rub it using a cloth and all stained areas. Turn the iron on so that it releases steam and this steam will clean the holes.
7. Cleaning with newspaper
Here’s a cleaning trick for sticky stains that some ironing starches can leave behind. Turn on the iron, set it maximum temperature without water or steam, Unfold the newspaper on the board and iron it gently until all residue is removed.