Clean the base It’s a job that can vary in complexity depending on how dirty it is, but it’s important to keep it spotless at all times to avoid potential discomfort with your delicate clothing. Here are some effective ways to maintain balance: iron is always bright.
How to clean the soleplate of the iron
- damp cloth: Unplug the iron and wait for it to cool. Clean the soleplate with a damp cloth.
- white vinegar: Dampen a cloth with white vinegar and rub the soleplate of the iron (make sure it is cold and unplugged). Vinegar dissolves many types of stains and is good at removing starch residue. Do not use on irons with aluminum soles as it may cause damage.
- Salt: Heat the iron on a low setting without steam. Sprinkle a layer of salt on a newspaper or paper towel. Run the hot iron over the salt. The salt particles should help loosen debris from the bottom.
- Tooth paste: Apply a small amount of white toothpaste (not gel) to the cold, unplugged baseplate. Rub with a clean, damp cloth. Then wipe off the residue with another damp cloth.
- Sodium bicarbonate: Make a paste with baking soda and water. Apply this mixture to the cold, unplugged base with a soft cloth, then wipe with a damp cloth to remove any residue.
-
Commercial cleaner: There are cleaning products specifically designed to clean irons. If you choose this option, be sure to follow the manufacturer’s instructions.
- Settle down: Fill the iron’s water tank, set the setting to maximum, and activate the steam on an empty cloth or sink to make sure any cleaning residue is gone.
-
Test: Finally, iron a test fabric to make sure all residue has been removed.
Always remember to read your iron’s user manual to make sure you don’t run into any problems. cleaning method be safe for your specific model.