One day you’ll put in the washing machine and you’ll see. something black in the tire. You look a little more, and of course there are the very undesirable spots of black mold. But how could this happen? It’s simple, mold builds up in areas with excess moisture like yours. washing machine. Some water has always accumulated inside, so mold growth or even emergence is very common. bad odor inside the appliance.

Relating to

  • Steps to clean your washing machine (inside)

  • Three tricks to make your laundry come out cleaner than the washing machine

In this article we will explain how to clean rubber from washing machine But first of all, what you need to know is how to avoid getting to this point. Therefore, it is very important that you remove the laundry after each wash and leave the door of the washing machine open. In this way, you will ensure that it is ventilated and dried and that water does not accumulate inside.

The same goes for clothes. Do not collect dirty laundry in it until the moment you start it. It can take days and if it’s wet you’ll help them get out. mushroom. Finally, we recommend wiping the inside of the rubber with a cloth after each wash, so you can be sure there are no traces of fungus.

How to clean the rubber of the washing machine with natural products?

If you do not want to use chemical products to end this problem, we have mentioned a homemade trick that will help you get rid of bad smells in this article. It consists of mixing three liters of water, 60 ml of lemon juice and 250 ml of hydrogen peroxide. Apply this mixture and leave it on the rubber for a few minutes so that the mold inside comes out. Remove with a cloth and dry the area thoroughly. If there is embedded mold, you can use a sponge and rub it gently, being careful not to damage the rubber.

How to clean the rubber of the washing machine with bleach?

You may be interested in:

one

How to clean solar panels: tricks, tips and advice

one

How to clean solar panels: tricks, tips and advice

one

How to clean a Dyson vacuum and make it look like new

one

How to clean silver in five minutes: the trick everyone is talking about


Another product that we can use to clean the rubber of our washing machine is bleach. Mix four parts water with one part bleach and put the mixture in a sprayer. Spray it into the rubber and let it sit for a few minutes. Wear gloves and wipe the mixture off with a damp cloth. Run cold water and remove again and dry with a dry cloth to make sure there are no traces of bleach. Leave the washing machine door open to dry properly.

Now you know a lot of tips to know how to clean the rubber that is black and looks like golden jets from the washing machine.