For work on the installation and disassembly of the wheels, I made two devices.
The first is made of a 100mm long rod with an M12 × 1.5 thread, which acts as a guide and facilitates removal and installation of the wheel on the car.
The second is made of a polyethylene pipe of a suitable diameter. I heated the pipe with a hair dryer and formed a hexagon over the bolt head. It turned out to be a useful tool for loosening and tightening wheel bolts that do not damage the paint of deep wells.
V. Krivosheev, Samara
The prize for the author of the opinion is a set of SYNTHETIUM car cosmetics.
Dear car experts! When sending an advice, do not forget to state your postal address with six-digit zip code, surname, first name and patronymic (in full), as well as a telephone number for communication. This will greatly simplify and speed up the sending of well-deserved prizes.
You can send your advice by e-mail. [email protected]. If possible, illustrate your own know-how with photos and/or diagrams.
- Detailed instructions on how to mist the car yourself – here.
- “Behind the wheel” can also be read on VKontakte